The Z Garage bought a 3D scanner...
And we're using it for development on some of our products! But we also want to be able to provide them to the community for anyone to model with and fabricate custom Z parts! We don't have tons of models yet, but if you have any specific requests for models, send us a message in the Contact Us tab and we will see if we can get a scan for you!
Note that the nature of 3d scanning leaves most models with gaps or voids so these are mesh models, not solid models that could be used for 3D printing in their current form. If you have the skills to finalize the models and would like us to post the models on our site for others, we would love for you to send us a message!
Note that the nature of 3d scanning leaves most models with gaps or voids so these are mesh models, not solid models that could be used for 3D printing in their current form. If you have the skills to finalize the models and would like us to post the models on our site for others, we would love for you to send us a message!
Pathfinder Bell 30aThis model is a Z32 transmission with a Pathfinder bell housing. This means the rear of the case is a Z32 and the front is a Pathfinder so take this into account if you are relying on a specific transmission configuration. The size and mounting points are the same as any 30a (that I know of).
|
Z32 Bell CD009This model is a CD009 that had the front bell housing cut off, and the Jim Wolf CD009 VG30 adapter kit installed which allows the use of a Z32 automatic transmission bell housing.
| ||||
Z31 Gauge Hood
|
Justin at Cogware.net has been kind enough to send us his 3D scan of a Z31 gauge hood.
|
| digidashscanmildcleanup.obj |