Distributor Cap Block Off
If you're moving to a stand alone ECU with coil on plugs and no longer using the distributor on your Z, you can remove the top of the distributor and cap it off with our Distributor cap for a clean tucked look!
Modification of the distributor rotor shaft is required. The shaft that holds the rotor must be trimmed so the CAS disk is still held in place. View an installation video here
Comes with a distributor cap and 2x stainless steel screws.
There has been one case where an aftermarket distributor caused the cap to not fit properly. If you have an aftermarket distributor and are interested in our block off cap, Contact Us first to ensure the cap will fit, or we can send you a cap that will fit properly.
Verified to fit 1986